View SP14Q002-A1_5403182.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

for messrs. date. mar.06,2009 customer?s acceptance specifications SP14Q002-A1 c o n t e n t s no. item sheet no. page 1 cover 7b64ps 2701-SP14Q002-A1-6 1-1/1 2 record of revision 7b 64ps 2702-SP14Q002-A1-6 2-1/2~2/2 3 mechanical data 7b64ps 2703-SP14Q002-A1-6 3-1/1 4 absolute maximum ratings 7b64ps 2704-SP14Q002-A1-6 4-1/1 5 electrical characteristics 7b64ps 2705-SP14Q002-A1-6 5-1/1 6 optical characteristics 7b64ps 2706-SP14Q002-A1-6 6-1/2~2/2 7 block diagram 7b64ps 2707-SP14Q002-A1-6 7-1/1 8 interface timing 7b64 ps 2708-SP14Q002-A1-6 8-1/3~3/3 9 outline dimensions 7b63ps 2709-SP14Q002-A1-6 9-1/2 7b64ps 2709-SP14Q002-A1-6 9-2/2 10 quality standard 7b64ps 2710-SP14Q002-A1-6 10-1/3~3/3 11 precaution in design 7b64ps 2711-SP14Q002-A1-6 11-1/3~3/3 12 designation of lot mark 7b64ps 2712-SP14Q002-A1-6 12-1/1 13 precaution for use 7b64ps 2713-SP14Q002-A1-6 13-1/1 ? when products will be discontinued , customers will be informed by hitachi with twelve months prior announcement. accepted by; proposed by; kaohsiung hitachi electronics co.,ltd p.o. box 26-27 2,13th east st. k.e.p.z. kaohsiung taiwan r.o.c. tel:(07) 821-5811 ( 7 line) fax:(07) 821-5815 kaohsiung hitachi electronics co.,ltd. sh. no. 7b64ps 2701-SP14Q002-A1-6 page 1-1/1 www.datasheet.co.kr datasheet pdf - http://www..net/
record of revision date sheet no. summary ?99.03.18 7b64ps 2709- SP14Q002-A1-2 page 9-2/2 changed: fpc:pitch 1.0mm 16pins ? pitch 1.25mm 14pins 7b64ps 2704- SP14Q002-A1-3 page 4-1/1 changed: static electricity ? 7b64ps 2705- SP14Q002-A1-3 page 5-1/1 changed: 5.1 electrical characteristics note4 d0~d3=0,1,0,1?. ? note4 test pattern is all?q?. ?00.03.01 7b64ps 2708- SP14Q002-A1-3 page 8-1/3 changed: load sequence: feb.25,?04 7b64ps 2706- SP14Q002-A1-4 page 6-1/2 8.3 timing of power supply and interface signal added tdld min. 50 revised tch max. 0~50 30 7b64ps 2704- SP14Q002-A1-5 page 4-1/1 4.2 environmental absolu te maximum ratings changed note 2 0 ? c ? -20 ? c added note 6. added note 7. 7b64ps 2705- SP14Q002-A1-5 page 5-1/1 5.2 electrical characteristics of backlight added note 1~4 may.14.?04 7b64ps 2710- SP14Q002-A1-5 page 10-1/3 10.1 appearance inspection condition changed all kaohsiung hitachi electronics co.,ltd. date dec.05,?08 7b64ps 2702-SP14Q002-A1-6 page 2-1/2 sh. no. symbol min. max. unit - - 100 - symbol min. max. unit vesd 0 - +/-100 v vesd 1 - +/-10 kv x2 x1 x240 load x240 x1 x1 load www.datasheet.co.kr datasheet pdf - http://www..net/
record of revision date sheet no. summary 7b64ps 2705- SP14Q002-A1-5 page 5-1/1 5.1 electrical characteristics added item symbol min. typ. max power supply voltage logic vdd-vss 3.2 3.3 3.4 21.0 22.0 23.0 20.0 21.0 22.0 recommend lc driving voltage vdd-vo 19.0 20.0 21.0 may.14.?04 7b64ps 2706- SP14Q002-A1-5 page 6-2/2 6.2 optical characteristics of backlight added the lcd driving voltage should be adjusted at the voltage where the peak contrast is obtained. mar.06,?09 7b64ps 2712 SP14Q002-A1-6 page 12-1/1 12. designation of lot mark revised reversion from rev. to rev.b kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2702-SP14Q002-A1-6 page 2-2/2 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
3. general specifications (1) part name SP14Q002-A1 (2) module size 167.0(w)mm 109.0(h)mm 10.0 (d)mm (max.) (3) effective display area 120 mm min 89 mm min. (4) dot size 0.345(w)min. 0.345(h)min (5) dot pitch 0.360(w)mm 0.360(h)mm (6) dot number 320 (w) 240 (h) (7) duty ratio 1/240 (8) lcd type fstn black / white type (negative type) the upper polarizer is anti-glare type. the bottom polarizer is transmissive type. (9) viewing direction 6 o?clock (10) back light cold cathode fluorescent lamp. kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2703-SP14Q002-A1-6 page 3-1/1 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
4. absolute maximum ratings 4.1 electrical absolute maximum ratings. vss=0v:standard item symbol min. max. unit comment power supply for logic vdd-vss 0 6 v power supply for lc driving vdd-vee 0 27.5 v input signal voltage vi -0.3 vdd+0.3 v note 1 input signal current ii 0 1 a vesd0 - 100 v note 2,3,4 static electricity vesd1 - 10 kv note 2,3,5 note 1. disp.off , frame , load , cp , d0~d3. note 2. make certain you are grounded when handling lcm. note 3. energy storage capacit ance 200pf , discharge resistance 250 ta=25 ? c , 60%rh. note 4. contact discharge to i/f connector pins. note 5. contact discharge to front metal bezel. 4.2 environmental absolute maximum ratings. item operating storage ommnt min. max. min. max. ambient temperature 0 ? c 50 ? c note 5 -20 ? c 60 ? c note 2,3 humidity note 1 note 1 without condensation vibration - 2.45m/s 2 (0.25g) - 11.76m/s 2 (1.2g) note 5 note 4 shock - 29.4m/s 2 (3 g) - 490.0m/s 2 (50 g) note 5 xyz directions corrosive gas not acceptable not acceptable note 1 ta Q40? c : 85%rh max. ta>40 ? c : absolute humidity must be lower than the humidity of 85% rh at 40 ? c note 2 ta at -20 ? c < 48hrs, at 60 ? c < 168hrs. note 3 background color changes slightly depending on ambient temperature . the phenomenon is reversible. note 4 5hz~100hz (except resonalce frequency and x,y,z each direction within 1 hour) note 5 the module should operated normally after finish the test. note 6 when lcm will be operated at 0 ? c , the life time of cfl will be reduced. please make sure that the characteristics of the inverter meet the cfl specification. note 7 operation temperature not include cfl . kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2704-SP14Q002-A1-6 page 4-1/1 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
5. electrical characteristics 5.1 electrical characteristics i t e m symbol condition min. typ. max. unit 4.75 5.0 5..25 power supply voltage for logic vdd-vss - 3.2 3.3 3.4 v power supply voltage for lc driving vee-vss - -23.1 -22.0 -20.9 v input signal voltage vi h level 0.8vdd - vdd v note 1 l level 0 - 0.2vdd v power supply current for logic note 2 idd vdd-vss=5.0v vee-vss=-22.0v - 6.0 - ma power supply current for lc driving note 2 iee vdd-vss=5.0v vee-vss=-22.0v - 5.0 - ma recommended lc ta= 0 ? c , ? = 0? 21 22 23 v driving voltage vdd-v0 ta=25 ? c , ? = 0? 20 21 22 v note 3 ta=40 ? c , ? = 0? 19 20 21 v frame frequency note4 fframe - 70 75 80 hz note 1 : disp.off , frame , load , cp , d0~d3. note 2 : flm=75hz , test pattern is all ?q?. vdd-v0=21.0v , ta=25 ? c note 3 : recommended lc driving voltage may fluctuate about 1.0v by each module. test pattern is all ?q? note 4 :please set the frame freque ncy so as to avoid flicker and rippling on the display. 5.2 electrical characteristics of backlight item symbol min. typ. max. unit note lamp voltage vl - 300 - v ta=25 ?c frequency fl - 70 85 khz ta=25 ?c lamp current il 4 5 6 ma ta=25 ?c starting discharge voltage vs (1000) - - v ta=25 ?c note 1 : please make sure that your in verter is designed to meet the above specifications. note 2 : starting discharge voltage is increased when lcm is operating at lower temperature , please check the characteristics of your inverter , so as to ensure discharge at low temperature. note 3 : average life time of cfl will be decreased when lcm is operating at lower temperature. note 4 : lower driving frequency of cfl inverter may cause mechanical noise of the backlight system . before designing the inverter , please onsider the driving frequency of noise . kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2705-SP14Q002-A1-6 page 5-1/1 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
6. optical characteristics 6.1 optical characteristics of lcd ta=25 ? c(backlight on) item symbol conditional mi n. typ. max. unit note viewing area ? 2- ? 1 k R 2.0 - 40 - deg 1,2 contrast ratio k ? =0 ? , ? =0 ? - 25 - - 3 response time (rise) tr ? =0 ? , ? =0 ? - 120 - ms 4 response time (fall) tf ? =0 ? , ? =0 ? - 150 - ms 4 note 1. definition of ? and ? note 3. definition of contrast ?k? note 2. definition of viewing angle ? 1 and ? 2. note 4. definition of optical response operating voltage b1 b2 (b1) (di="h") (b2) (di="l") brightness ? =10 ? x ? 2 viewing direction (normal) y( ? =180 ? ) ? 1 x? y?( ? =0 ? ) backlight lcd sensor ? =0 ? ? k 2.0 contrast ratio k vs viewing angle ? ? 1<10 ? < ? 2 ? 1 ? 2 non-selective state 100% 90% 10% t r tf rise time fall time selective state non-selective state brightness (measure condition by hitachi) brightness on selected dot (b1) brightness on non-selected dot (b2) k= kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2706-SP14Q002-A1-6 page 6-1/2 sh. no. bm7 distance=0.4m www.datasheet.co.kr datasheet pdf - http://www..net/
6.2 optical characteristics of backlight i t e m min. typ. max. unit note brightness - 140 - cd/m 2 il=5ma note 1,2 rise time - 5 - minute il=5ma brightness 80% brightness uniformity - - 30 % note 1,3 cfl : initial, ta=25 ? c display data should be all ?on?. the lcd driving voltage should be adjusted at the voltage where the peak contrast is obtained. note 1. measurement after 10 minutes of cfl operating. note 2. brightness control : 100% note 3.measure of the following 9 places on the display. definition of the brightness tolerance. y=240 y=160 y=80 x=60 x=120 x=180 average brightness max or min brightness - average brightness 100% ( ) kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2706-SP14Q002-A1-6 page 6-2/2 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
? do~d3 frame load disp.off cp ic4 320 240 dots ic2 ? : timing circuit d0 d1 d2 ic1 x240 d3 x1 x81 x161 x160 x240 x80 x1 ic5 ic6 ic7 power supply cfl vdd vss vo vee vcfl vcfl y320 y241 y160 y81 y80 y1 7. block diagram kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2707-SP14Q002-A1-6 page 7-1/1 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
8. interface timing chart 8.1 interface timing chart 52.1 ? s Q t Q 59.5 ? s x1 x2 x240 load cp d3 d2 d1 d0 frame load frame d0~d3 m y1 y2 y3 y4 y5 y6 y7 y8 y317 y318 y319 y320 x1 x2 x239 x240 240 t kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2708-SP14Q002-A1-6 page 8-1/3 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
8.2 timing characteristics item symbol min. typ. max. umit clock frequency fcp - - 6.5 mhz clock pulse width tw 63 - - ns clock rise, fall time tr,tf - - 20 ns data set up time tdsu 50 - - ns data hold time tdhd 50 - - ns load set up time tlsu 80 - - ns load clock time tlc 100 - - ns ?frame? set up time tsetup 100 - - ns ?frame? hold time thold 100 - - ns ?load? pulse width twc 125 - - ns tw tw tw cp tdsu tdhd d0~d3 tlc tlsu load twc tr tf tsetup thold frame 0.2vdd 0.8vdd tf tr 0.2vdd 0.8vdd 0.2vdd 0.8vdd 0.2vdd 0.8vdd 0.2vdd 0.8vdd 0.2vdd 0.8vdd 0.2vdd 0.8vdd 0.2vdd 0.8vdd 0.2vdd 0.8vdd 0.2vdd 0.8vdd 0.8vdd 0.8vdd kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2708-SP14Q002-A1-6 page 8-2/3 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
8.3 power on/off timing sequence symbol min. max. unit comment tdld 50 - ms tch 0 30 ms (note 1) tldh 0 - ms tdor - 100 ns tdof - 100 ns tdlcr 0 - ms (note 2) tdlcf 0 - ms tdlcs 20 - ms note 1 please keep the specified sequence because wrong sequence may cause permanent damage to the lcd panel. note 2 hitachi recommends you to use doff function. display quality may deteriorate if you don?t use doff function. 8.4 power supply for lcm note (1) vr : 10kohm note (2) we recommend to add fuse (1a) to vdd line. tdld tdld tch tch tdlcr tdlcf tdlcs tdlcs tldh tdor tdof tldh 0.8vdd 0.8vdd 0.8vdd 0.8vdd 0.2vdd 0.2vdd vdd signal doff gnd gnd vee gnd gnd lcm vdd vss vee +5v 22.0v vr v0 kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2708-SP14Q002-A1-6 page 8-3/3 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
9.2 display pattern 9.3 interface pin connection ffc : pitch 1.25mm 14 pins interface pin no. signal level function lcm i/f1 1 d0 h/l display data 2 d1 3 d2 4 d3 5 disp.off h/l h : on / l : off 6 frame h first line marker 7 n.c - - 8 load h ? l data latch 9 cp h ? l data shift 10 vdd - power supply for logic 11 vss - gnd 12 vee - power supply for lc 13 v0 - operating voltage lc driving 14 vss - gnd interface pin no. signal level function cfl cfl i/f 1 vcfl - power supply for cfl 2 n.c - - 3 n.c - - 4 vcfl - cfl gnd cfl i/f : j. a. e. / il ? g ? 4s ? s3c2 0.36 0.345 0.36 0.345 scale: nts unit : mm measurement tolerance : 0.1 115.185 ( 320 dots ) 86.385 (240 dots) kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2709-SP14Q002-A1-6 page 9-2/2 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
10. appearance standard 10.1 appearance inspection conditions visual inspection should be done under the following condition. (1) the inspection sh ould be done under in the dark room. (2) the cfl should be lighted with the prescribed inverter. (3) the distance between eyes of an inspector and the lcd module is 25 cm. (4) the viewing zone is shown the figure . 10.2 definition of each zone a zone : within th e viewing area specified at page 9-1/2 of this document. b zone : area between the edge line of lcd glass and the vi ewing area line specified at page 9-1/2 of this document. lcd bezel eye eye 25 ? 25 ? edge line of lcm effective area a zone b zone kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2710-SP14Q002-A1-6 page 10-1/3 sh. no. viewing angle Q 25 www.datasheet.co.kr datasheet pdf - http://www..net/
10.3 appearance specification *) if the problem occur ess about this item, the responsible person of both par ty (customer and hitachi) will discuss more detail. no. item criteria a b scratches distinguished one is not acceptable (to be judged by hitachi limit sample) ? - dent same as above ? - wrinkles in polarizer same as above ? - bubbles average diameter d(mm) maximum number acceptable d Q 0.2 ignore 0.2SP14Q002-A1-6 page 10-2/3 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
no. item criteria a b width d(mm) length l(mm) maximum number acceptable minimum size w Q 0.25 l Q 1.2 2 20mm w Q 0.2 l Q 1.5 3 20mm w Q 0.15 l Q 2.0 3 20mm w Q 0.1 l Q 3.0 4 20mm contrast irregularity (line) (filamentous) total 6 ? - l c d rubbing scratch to be judged by hitachi standard ? - no. item criteria d Q 0.4 ignore dark spots, white spots) foreign materials (spot d 0.4 none w Q 0.2 l<2.5 Q 1 w Q 0.2 l>2.5 none foreign materials (line) w>0.2 none w<=0.1 ignore 0.10.2 none b a l a b c a a b b w note (1) ( 1) definition of length l and width w c...salient =d...average dianeter a+b 2 kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2710-SP14Q002-A1-6 page 10-3/3 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
11. precaution in design 11.1 lc driving voltage (vee) and viewing angle range. setting vee out of the recommended condition will be a cause for a change of viewing angle range. 11.2 precautions against static charge as this module contains c- mos lsis , it is not strong against electrostatic discharge. make certain that the operator?s body is connected to the ground through a list band etc. and don?t touch i/f pins directly. 11.3 power on sequence input signals should not be applied to lcd module before power supply voltage is applied and reaches to specified voltage (vdd). if above sequence is not kept, c-mos lsis of lcd modules may be damaged due to latch up phenomenon. 11.4 packaging (1) no leaving products is pr eferable in the place of high humidity for a long period of time. for their storage in the place where temperature is 35 ? c or higher, special care to prevent them from high humidity is required. a combination of high temperature a nd high humidity may cause them polarization degradation as well as bubble generation and polarizer peel-off. please keep the temperature and humidity within the specified range for use and storage. (2) since polarizers tend to be easily damaged, they should be handled full wi th care so as not to get them touched, pushed or rubbed. (3) as the adhesives used for a dhering polerizers are made of organic substances which will be deteriorated by a chemical reaction with such chemicals as acetone, tuluene, ethanol and isopropyl alcohol. the following solvents are recommended for use: normal hexane please contact us when it is necessary for you to use chemicals. (4) lightly wipe to clean the dirty surface with absorbent cotton waste or other soft material like chamois , soaked in the chemicals recommended without scrubbing it hardly. to prevent the display surface from damage and keep the appearance in good state, it is sufficient, in general, to wipe it with absorbent cotton. kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2711-SP14Q002-A1-6 page 11-1/3 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
(5) immediately wipe off saliva or water drop attached on the display area because its long period adherance may cause deformation or faded color on the spot. (6) foggy dew deposited on the surface and due to coldness will be cause for polarizer damage, st ain and dirt on product. when necessary to take out the products from some place at low temperature for test, etc. it is required for them to be warmed up in a container once at the temperat ure higher than that of room. (7) touching the display area and contact terminals with bare hands and contaminating them are prohibited, because the stain on the display area and poor insulation between terminals are often caused by being touched by bare hands. (there are some co smetics detrimental to polarizers.) (8) in general the quality of glass is fragile so that it tends to be cracked or chipped in handling, specially on its periphery. be careful not to give it sharp shock caused by dropping down, etc. kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2711-SP14Q002-A1-6 page 11-2/3 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
11.5 caution for operation (1) it is an indispensable condi tion to drive lcds within the specified voltage limit since the higher voltage than the limit causes the shorter lcd life . an electrochemical reaction due to direct current causes lcds undesirable deterioration, so that the use of direct current driver should be avoided. (2) response time will be extremely delayed at lower temperature than the specified operating temperature range and on the other hand at higher temperature lcd?s show dark bule color in them . however th ose phenomena do not mean malfunction or out of order with lcd?s which will come back in the specif ied operating temperature range. (3) if the display area is pu shed hard during operation , some font will be abnormally displayed but it resumes normal condition after turning off once. (4) a slight dew depositing on terminals is a cause for electrochemical reaction resulting in terminal open circuit. usage under the relative condition of 40 ? c 50%rh or less is required. 11.6 storage in case of storing for a long period of time (for instance, for years) for the purp ose of replacement use , the following ways are recommended. (1) storage in a ployethylene bag with the opening sealed so as not to enter fresh air outside in it , and with no desiccant. (2) placing in a dark place where neither exposure to direct sunlight nor light is, keeping temperature in the range from 0 degree c to 35 degree. (3) storing with no touch on polarizer surface by anything else. (it is recommended to store them as they have been contained in the inner container at the time of delivery from us.) 11.7 safety (1) it is recommendable to crash damaged or unnecessary lcds into pieces and wash off liquid crystal by either of solvents such as acetone and ethanol, which shoud be burned up later. (2) when any liquid leaked ou t of a damaged glass cell comes in contact with your hands, please wash it off well with soap and water. kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2711-SP14Q002-A1-6 page 11-3/3 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/
12. designation of lot mark 12.1 lot mark lot mark is consisted of 5 digits for production lot and 6 digits for production control. 12.2 serial no. serial no. is consisted of 6 digits number (000001~999999). 12.3 location of lot mark label is bring attached on the back side of module. 12.4 revision(rev.) control rev no. item mcount ic:mn73099hed(panasonic) transistor:2sa1036k(rohm) b mcount ic:it7001m(ite) transistor:2sa1576(rohm) week (day in calendar) figure in lot mark 1~ 7 1 8~14 2 15~21 3 22~28 4 29~31 5 month figure in lot mark month figure in lot mark jan. 01 jul. 07 feb. 02 aug. 08 mar. 03 sep. 09 apr. 04 oct. 10 may 05 nov. 11 jun. 06 dec. 12 year figure in lot mark 2009 9 2010 0 2011 1 2012 2 2013 3 1 4 0 8 year month week t digits for production control t : made in taiwan kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2712-SP14Q002-A1-6 page 12-1/1 sh. no. SP14Q002-A1 b www.datasheet.co.kr datasheet pdf - http://www..net/
13. precaution for use (1) a limit sample should be provided by the both parties on an occasion wh en the both parties agreed its necessity. judgement by a limit sample shall take effect after the limit sample has been established and confirmed by the both parties. (2) on the following occasions, the handling of the problem should be decide d through discussion and agreement between responsible persons of the both parties. (1) when a qu estion is arisen in the specifications. (2) when a new pr oblem is arisen which is not specified in this specifications. (3) when an inspection specifications change or operating condition cha nge in customer is reported to hitachi, and some problem is arisen in this specification due to the change. (4) when a new pr oblem is arisen at the customer?s operat- ing set for sample evaluation in the customer site. the precaution that should be observed when handling lcm have been explained abo ve. if any points are unclear or if you have any requests , please contact hitachi. kaohsiung hitachi electronics co.,ltd. date mar.06,?09 7b64ps 2713-SP14Q002-A1-6 page 13-1/1 sh. no. www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of SP14Q002-A1

	To Download SP14Q002-A1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .